Technical Bulletin 153
Warmhaus Enerwa Plus – amendment to manufacturer’s instructions
Central heating boiler manufacturer Warmhaus has advised of a modification to the manufacturer’s instructions for the Enerwa Plus range of boilers. Issued August 2018.
Introduction
This Technical Bulletin has been published in conjunction with the central heating boiler manufacturer Warmhaus, to highlight a misprint that has been identified in the Enerwa Plus range of boilers. There is one model in this range, supplied in three different outputs, which are identified below:
- 2530C (31kW)
- 3035C (35kW)
- 3540C (39kW).
Manufacturer’s instructions
Warmhaus has identified that there is a misprint in all manufacturer’s installation and servicing instructions for the Enerwa Plus boiler range, printed from 1 August 2017.
The minimum clearance for dimension A, in the Table below, was printed incorrectly and stated 30mm. Dimension A should be 300mm.
All new manuals will have the correct dimension, as shown in the table below.
Note 1: For details of current gas safety legislation, building legislation and industry standards for the geographical areas covered by Gas Safe Register, see the Legislative, Normative & Informative Document List (LNIDL)(1) by logging into your online account at: https://www.gassaferegister.co.uk/sign-in/
Note 2: For general information about the process behind the development of Gas Safe Register Technical Bulletins and the expectations for all stakeholders, see TB 1000(2) by logging into your online account at: https://www.gassaferegister.co.uk/sign-in/
If you require any further information, please contact the Warmhaus Technical Support team on 01234 510020.
Bibliography
(1) LNIDL – Gas Safe Register Legislative, Normative & Informative Document List
(2) TB 1000 – An introduction to Gas Safe Register Technical Bulletins
Download Technical Bulletin 153 here: Technical Bulletin 153.
